mikrotik-mcp

NAT Rules Management

mikrotik_create_nat_rule

Creates a NAT rule on MikroTik device.

• Parameters:
  • chain (required): Chain type (“srcnat” or “dstnat”)
  • action (required): Action type
  • src_address (optional): Source address
  • dst_address (optional): Destination address
  • src_port (optional): Source port
  • dst_port (optional): Destination port
  • protocol (optional): Protocol
  • in_interface (optional): Input interface
  • out_interface (optional): Output interface
  • to_addresses (optional): Translation addresses
  • to_ports (optional): Translation ports
  • comment (optional): Description
  • disabled (optional): Disable rule
  • log (optional): Enable logging
  • log_prefix (optional): Log prefix
  • place_before (optional): Rule placement
• Example:

  mikrotik_create_nat_rule(chain="srcnat", action="masquerade", out_interface="ether1")
  

mikrotik_list_nat_rules

Lists NAT rules on MikroTik device.

• Parameters:
  • chain_filter (optional): Filter by chain
  • action_filter (optional): Filter by action
  • src_address_filter (optional): Filter by source address
  • dst_address_filter (optional): Filter by destination address
  • protocol_filter (optional): Filter by protocol
  • interface_filter (optional): Filter by interface
  • disabled_only (optional): Show only disabled rules
  • invalid_only (optional): Show only invalid rules
• Example:

  mikrotik_list_nat_rules(chain_filter="srcnat")
  

mikrotik_get_nat_rule

Gets detailed information about a specific NAT rule.

• Parameters:
  • rule_id (required): Rule ID
• Example:

  mikrotik_get_nat_rule(rule_id="*1")
  

mikrotik_update_nat_rule

Updates an existing NAT rule.

• Parameters:
  • rule_id (required): Rule ID
  • All parameters from create_nat_rule (optional)
• Example:

  mikrotik_update_nat_rule(rule_id="*1", comment="Updated NAT rule")
  

mikrotik_remove_nat_rule

Removes a NAT rule from MikroTik device.

• Parameters:
  • rule_id (required): Rule ID
• Example:

  mikrotik_remove_nat_rule(rule_id="*1")
  

mikrotik_move_nat_rule

Moves a NAT rule to a different position.

• Parameters:
  • rule_id (required): Rule ID
  • destination (required): New position
• Example:

  mikrotik_move_nat_rule(rule_id="*1", destination=0)
  

mikrotik_enable_nat_rule

Enables a NAT rule.

• Parameters:
  • rule_id (required): Rule ID
• Example:

  mikrotik_enable_nat_rule(rule_id="*1")
  

mikrotik_disable_nat_rule

Disables a NAT rule.

• Parameters:
  • rule_id (required): Rule ID
• Example:

  mikrotik_disable_nat_rule(rule_id="*1")
  

This site is open source. Improve this page.